Simple Per-Plan Pricing
No subscription. No seat licenses. Buy credits when you need them — they never expire.
Free Trial
Run TakeoffBuilder on a real plan set before you spend a dollar. No credit card required.
- One complete takeoff report
- Any trade, any plan size
- Counts, schedules and materials list
- Confidence flags on uncertain counts
- Watermarked report preview
- Upgrade to full export anytime
Single Takeoff
One credit covers one complete plan submission — regardless of page count or complexity.
- Complete material counts in 15–30 minutes
- Panel schedules, circuits and wire footage
- Labor hour estimates
- Excel, CSV and JSON export
- One free re-run with your feedback
- Credits never expire
Credit Packs
Volume pricing starts at 6 credits and slides to $119 each at 25+. Save up to 40%.
- 6–10 credits: $179 each
- 11–14 credits: $165 each
- 15–19 credits: $153 each
- 20–24 credits: $139 each
- 25+ credits: $119 each
- Credits pool across your whole team
Stop Counting. Start Winning Bids.
Upload your PDF plans. The AI reads every page, counts every device, maps every circuit, and flags anything it is unsure about. You get contractor-ready material counts in 15 to 30 minutes, not 3 days.
Manual takeoffs are the most expensive hour you do not bill.
A commercial plan set takes 8 to 40 hours to count by hand. At estimator rates of $75 to $150 per hour, that is $600 to $6,000 in labor on every bid. Most contractors do not skip bids because the work is not there. They skip bids because the counting takes too long to make the turnaround worth it. TakeoffBuilder does not replace your judgment. It eliminates the hours you spend before your judgment ever gets to work.
- 8 to 40 hours per plan set at $75 to $150 per hour equals $600 to $6,000 in labor
- One TakeoffBuilder credit: $199. Any size plan. 15 to 30 minutes.
- The math works on the first job. Every job after that is margin.
The bottleneck is not the pricing. It is the counting.
Manual takeoffs are the most expensive hour you do not bill.
A commercial plan set takes 8 to 40 hours to count by hand. At estimator rates of $75 to $150 per hour, that is $600 to $6,000 in labor on every bid. Most contractors do not skip bids because the work is not there. They skip bids because the counting takes too long to make the turnaround worth it. TakeoffBuilder does not replace your judgment. It eliminates the hours you spend before your judgment ever gets to work.
- 8 to 40 hours per plan set at $75 to $150 per hour equals $600 to $6,000 in labor
- One TakeoffBuilder credit: $199. Any size plan. 15 to 30 minutes.
- The math works on the first job. Every job after that is margin.
Real Questions From Contractors
We've heard every objection. Here's the honest answer to each one.
Will it catch everything, or will I miss items?
Accuracy runs 95%+ on standard commercial drawings. Anything the AI isn't confident about gets flagged — with the exact page and location. You review flagged items manually. Most contractors find the spot-check takes 5-10 minutes and catches less than 5% edge cases.
- 95%+ accuracy on standard commercial plans
- Flagged items show exact page and location for manual review
What if my plans are old, scanned, or hand-drawn?
We've processed 47-page scanned permit sets, faded drawings from the 80s, and hand-drawn TI plans. Accuracy may be slightly lower on degraded scans — the AI flags anything it's uncertain about rather than guessing. You get honest results, not inflated claims.
- Works on scanned, hand-drawn, and CAD exports
- Lower confidence items flagged, not silently guessed
How long does it actually take?
About 15 minutes for a typical 30-page commercial set. Larger plan sets — 80-100 pages — run 25-40 minutes. You'll get an email when results are ready. Upload before lunch, have counts before you leave the office.
- 30 pages: ~15 minutes
- Email notification when complete — no waiting at the screen
What exactly do I get back?
An Excel spreadsheet (or CSV) organized by trade category — circuits, devices, wire footage by gauge, conduit runs with sizing. The same format you'd hand to a supplier or import into your estimating software. Plus a flagged items list with page references.
- Excel, CSV, or JSON — your choice
- Organized by category, ready to import or price
How do I get started?
Create a free account with one Google click and we’ll show you a real commercial plan set alongside the AI-generated takeoff from it. See the output format, accuracy, and how flagged items work — before uploading any of your own plans. No credit card required.
- One Google click — no credit card required
- See a real example plan and takeoff output immediately
I already use PlanSwift / Bluebeam. Will this replace it?
No — and we're not trying to. TakeoffBuilder handles the counting. Your existing software handles pricing, markup, and workflow. We export to the formats your software imports. Think of it as a counting layer on top of what you already use.
- Exports to PlanSwift, Accubid, and Excel
- Complements your existing tools — doesn't replace them
Visit our complete FAQ page or contact support for specific questions about your projects
More Questions?See a Real Takeoff Before You Buy
Upload your plans. Get counts. See it work on your actual drawings before you spend a dollar.
- Sign up free — see a real example plan and AI takeoff output
- Results in about 15 minutes, not 3 days
- Works on your existing plans — PDF, scanned, or CAD export
The math works on the first job. Every job after that is margin.