Stop Counting by Hand. Get Your Takeoff in About 15 Minutes.
Upload your PDF plans. Select your trade. Download contractor-ready material counts — circuit by circuit, fixture by fixture, duct run by duct run. No software to install. No training. No subscription.
Manual takeoffs are the most expensive hour you do not bill.
A commercial plan set takes 8 to 40 hours to count by hand. At estimator rates of $75 to $150 per hour, that is $600 to $6,000 in labor on every bid. Most contractors do not skip bids because the work is not there. They skip bids because the counting takes too long to make the turnaround worth it. TakeoffBuilder does not replace your judgment. It eliminates the hours you spend before your judgment ever gets to work.
- 8 to 40 hours per plan set at $75 to $150 per hour equals $600 to $6,000 in labor
- One TakeoffBuilder credit: $199. Any size plan. 15 to 30 minutes.
- The math works on the first job. Every job after that is margin.
The bottleneck is not the pricing. It is the counting.
Every Trade. One Platform.
Upload your plans and get accurate material counts in about 15 minutes — across all major trades.
Electrical Takeoffs
Complete circuit-by-circuit counts from your electrical plans — panels, devices, wire footage, conduit runs, and junction boxes.
- Device counts: outlets, switches, dimmers, receptacles
- Panel schedules organized by circuit
- Wire footage estimates by gauge and type
HVAC Takeoffs
Comprehensive ductwork and mechanical counts — equipment schedules, diffuser locations, duct footage, and insulation requirements.
- Duct runs with dimensions and footage
- Diffuser and grille counts by type
- Equipment schedules: AHUs, VAVs, RTUs
Plumbing Takeoffs
Fixture counts, pipe routing, and material lists from your plumbing plans — residential and commercial.
- Fixture counts: toilets, sinks, showers
- Pipe runs by material, size, and footage
- Valve and fitting schedules
Manual takeoffs are the most expensive hour you do not bill.
A commercial plan set takes 8 to 40 hours to count by hand. At estimator rates of $75 to $150 per hour, that is $600 to $6,000 in labor on every bid. Most contractors do not skip bids because the work is not there. They skip bids because the counting takes too long to make the turnaround worth it. TakeoffBuilder does not replace your judgment. It eliminates the hours you spend before your judgment ever gets to work.
- 8 to 40 hours per plan set at $75 to $150 per hour equals $600 to $6,000 in labor
- One TakeoffBuilder credit: $199. Any size plan. 15 to 30 minutes.
- The math works on the first job. Every job after that is margin.
Real Questions From Contractors
We've heard every objection. Here's the honest answer to each one.
Will it catch everything, or will I miss items?
Accuracy runs 95%+ on standard commercial drawings. Anything the AI isn't confident about gets flagged — with the exact page and location. You review flagged items manually. Most contractors find the spot-check takes 5-10 minutes and catches less than 5% edge cases.
- 95%+ accuracy on standard commercial plans
- Flagged items show exact page and location for manual review
What if my plans are old, scanned, or hand-drawn?
We've processed 47-page scanned permit sets, faded drawings from the 80s, and hand-drawn TI plans. Accuracy may be slightly lower on degraded scans — the AI flags anything it's uncertain about rather than guessing. You get honest results, not inflated claims.
- Works on scanned, hand-drawn, and CAD exports
- Lower confidence items flagged, not silently guessed
How long does it actually take?
About 15 minutes for a typical 30-page commercial set. Larger plan sets — 80-100 pages — run 25-40 minutes. You'll get an email when results are ready. Upload before lunch, have counts before you leave the office.
- 30 pages: ~15 minutes
- Email notification when complete — no waiting at the screen
What exactly do I get back?
An Excel spreadsheet (or CSV) organized by trade category — circuits, devices, wire footage by gauge, conduit runs with sizing. The same format you'd hand to a supplier or import into your estimating software. Plus a flagged items list with page references.
- Excel, CSV, or JSON — your choice
- Organized by category, ready to import or price
How do I get started?
Create a free account with one Google click and we’ll show you a real commercial plan set alongside the AI-generated takeoff from it. See the output format, accuracy, and how flagged items work — before uploading any of your own plans. No credit card required.
- One Google click — no credit card required
- See a real example plan and takeoff output immediately
I already use PlanSwift / Bluebeam. Will this replace it?
No — and we're not trying to. TakeoffBuilder handles the counting. Your existing software handles pricing, markup, and workflow. We export to the formats your software imports. Think of it as a counting layer on top of what you already use.
- Exports to PlanSwift, Accubid, and Excel
- Complements your existing tools — doesn't replace them
Visit our complete FAQ page or contact support for specific questions about your projects
More Questions?Manual takeoffs are the most expensive hour you do not bill.
A commercial plan set takes 8 to 40 hours to count by hand. At estimator rates of $75 to $150 per hour, that is $600 to $6,000 in labor on every bid. Most contractors do not skip bids because the work is not there. They skip bids because the counting takes too long to make the turnaround worth it. TakeoffBuilder does not replace your judgment. It eliminates the hours you spend before your judgment ever gets to work.
The bottleneck is not the pricing. It is the counting.
See a Real Takeoff Before You Buy
Upload your plans. Get counts. See it work on your actual drawings before you spend a dollar.
- Sign up free — see a real example plan and AI takeoff output
- Results in about 15 minutes, not 3 days
- Works on your existing plans — PDF, scanned, or CAD export
The math works on the first job. Every job after that is margin.